(编辑:jimmy 日期: 2024/10/30 浏览:2)
概念
节流函数
间隔固定的时间执行传入的方法
目的是防止函数执行的频率过快,影响性能.常见于跟滚动,鼠标移动事件绑定的功能.
防抖函数
对于接触过硬件的人也许更好理解,硬件按钮按下时,由于用户按住时间的长短不一,会多次触发电流的波动,加一个防抖函数就会只触发一次,防止了无意义的电流波动引起的问题.
按键防反跳(Debounce)为什么要去抖动呢?机械按键在按下时,并非按下就接触的很好,尤其是有簧片的机械开关,会在接触的瞬间反复的开合多次,直到开关状态完全改变。
应用在前端时,常见的场景是,输入框打字动作结束一段时间后再去触发查询/搜索/校验,而不是每打一个字都要去触发,造成无意义的ajax查询等,或者与调整窗口大小绑定的函数,其实只需要在最后窗口大小固定之后再去执行动作.
自己的实现
防抖函数
关键点在于每次触发时都清空延时函数的手柄,只有最后一次触发不会清空手柄,所以最后一次触发会等默认的1s后去执行debounce传入的参数函数f. debounce内部返回的闭包函数,是真正每次被调用触发的函数,不再是原本的f,所以这里的arguments取闭包函数环境变量中的arguments并在执行f时传给f,在setTimeout函数的外面取得.
let debounce = function(f, interval = 1000) { let handler = null; return function() { if (handler) { clearTimeout(handler); } let arg = arguments; handler = setTimeout(function() { f.apply(this, arg); clearTimeout(handler); }, interval) } }
应用:
let input = document.querySelector('#input'); input.addEventListener('input', debounce(function(e) { console.log("您的输入是",e.target.value) }))
更高级的实现还会考虑到,以leading和trailing作为参数,起始先执行一次函数并消除后面的抖动,还是最后执行一下函数,消除前面的抖动,如同我这里的例子.后面分析loadash的防抖函数时会详细解析.
节流函数
let throttle = function(f,gap = 300){ let lastCall = 0; return function(){ let now = Date.now(); let ellapsed = now - lastCall; if(ellapsed < gap){ return } f.apply(this,arguments); lastCall = Date.now(); } }
闭包函数在不断被调用的期间,去记录离上一次调用间隔的时间,如果间隔时间小于节流设置的时间则直接返回,不去执行真正被包裹的函数f.只有间隔时间大于了节流函数设置的时间gap,才调用f,并更新调用时间.
应用:
document.addEventListener('scroll', throttle(function (e) { // 判断是否滚动到底部的逻辑 console.log(e,document.documentElement.scrollTop); }));
lodash源码分析
以上是对节流防抖函数最基础简单的实现,我们接下来分析一下lodash库中节流防抖函数的分析.
节流函数的使用
$(window).on('scroll', _.debounce(doSomething, 200));
function debounce(func, wait, options) { var lastArgs, lastThis, result, timerId, lastCallTime = 0, lastInvokeTime = 0, leading = false, maxWait = false, trailing = true; if (typeof func != 'function') { throw new TypeError(FUNC_ERROR_TEXT); } wait = wait || 0; if (isObject(options)) { leading = !!options.leading; maxWait = 'maxWait' in options && Math.max((options.maxWait) || 0, wait); trailing = 'trailing' in options "leadingEdge setTimeout") // Reset any `maxWait` timer. lastInvokeTime = time; // Start the timer for the trailing edge. timerId = setTimeout(timerExpired, wait); // Invoke the leading edge. return leading "remainingWait",result) return maxWait === false "shouldInvoke") var timeSinceLastCall = time - lastCallTime, timeSinceLastInvoke = time - lastInvokeTime; console.log("time",time,"lastCallTime",lastCallTime,"timeSinceLastCall",timeSinceLastCall) console.log("time",time,"lastInvokeTime",lastInvokeTime,"timeSinceLastInvoke",timeSinceLastInvoke) console.log("should",(!lastCallTime || (timeSinceLastCall >= wait) || (timeSinceLastCall < 0) || (maxWait !== false && timeSinceLastInvoke >= maxWait))) // Either this is the first call, activity has stopped and we're at the // trailing edge, the system time has gone backwards and we're treating // it as the trailing edge, or we've hit the `maxWait` limit. return (!lastCallTime || (timeSinceLastCall >= wait) || (timeSinceLastCall < 0) || (maxWait !== false && timeSinceLastInvoke >= maxWait)); } function timerExpired() { console.log("timerExpired") var time = Date.now(); if (shouldInvoke(time)) { return trailingEdge(time); } console.log("Restart the timer.",time,remainingWait(time)) // Restart the timer. console.log("timerExpired setTimeout") timerId = setTimeout(timerExpired, remainingWait(time)); } function trailingEdge(time) { clearTimeout(timerId); timerId = undefined; // Only invoke if we have `lastArgs` which means `func` has been // debounced at least once. console.log("trailing",trailing,"lastArgs",lastArgs) if (trailing && lastArgs) { return invokeFunc(time); } lastArgs = lastThis = undefined; return result; } function cancel() { if (timerId !== undefined) { clearTimeout(timerId); } lastCallTime = lastInvokeTime = 0; lastArgs = lastThis = timerId = undefined; } function flush() { return timerId === undefined "time",time); console.log("isInvoking",isInvoking); lastArgs = arguments; lastThis = this; lastCallTime = time; if (isInvoking) { if (timerId === undefined) { return leadingEdge(lastCallTime); } // Handle invocations in a tight loop. clearTimeout(timerId); console.log("setTimeout") timerId = setTimeout(timerExpired, wait); return invokeFunc(lastCallTime); } return result; } debounced.cancel = cancel; debounced.flush = flush; return debounced; }
ref
https://css-tricks.com/debouncing-throttling-explained-examples/
https://github.com/lodash/lodash/blob/4.7.0/lodash.js#L9840
https://jinlong.github.io/2016/04/24/Debouncing-and-Throttling-Explained-Through-Examples/
以上就是浅谈JavaScript节流和防抖函数的详细内容,更多关于JavaScript节流和防抖函数的资料请关注其它相关文章!